V2000-c Access Control Manuall
V2000-c Access Control Manual
The V2000-c is a RFID access control system that allows you to control the access to your premises using a card reader and a keypad. The system is easy to install and operate, and can be configured to suit your specific needs. In this article, we will provide you with a brief overview of the V2000-c access control system, its features, and how to use it.
Features of the V2000-c Access Control System
The V2000-c access control system has the following features:
Download File: https://miimms.com/2w4fFb
It has a built-in RFID card reader that can read cards with a frequency of 125KHz or 13.56MHz.
It has a keypad that can be used to enter passwords or PIN codes.
It has a white plastic enclosure that is rugged and durable.
It has a digital display that shows the status of the system and the access log.
It can be programmed to operate with either a 24VAC or 12VDC power supply.
It can be configured to allow or deny access to certain areas based on the time, day, or time and day.
It can store up to 1000 user cards and 1000 passwords.
It can support up to four door sensors, four exit buttons, and four alarm outputs.
It can communicate with a PC or a network via RS485 or TCP/IP protocols.
How to Use the V2000-c Access Control System
To use the V2000-c access control system, you need to follow these steps:
Install the system according to the installation manual. You need to connect the power supply, the door lock, the door sensor, the exit button, and the alarm output to the system. You also need to connect the system to a PC or a network if you want to use the RS485 or TCP/IP communication modes.
Program the system according to your needs. You can use the keypad or the PC software to set up the system parameters, such as the date and time, the card type, the password length, the access mode, the access time zone, etc. You can also add or delete user cards and passwords using the keypad or the PC software.
Use the system to control the access to your premises. You can use either a card or a password or both to open the door. The system will display the user name and ID on the screen and record the access log. If an unauthorized user tries to enter, the system will beep and show an error message on the screen. The system will also trigger an alarm output if there is a door open too long or a tamper attempt.
Conclusion
The V2000-c access control system is a reliable and convenient way to secure your premises. It has many features that make it easy to use and customize. It can also work with other devices and systems via RS485 or TCP/IP protocols. If you are looking for a RFID access control system that is simple and effective, you should consider the V2000-c access control system.